Copper PV-ribbon

for photovoltaic panels

Copper ribbon for photovoltaic panels

The so-called interconnect ribbons – tinned copper ribbons that are soldered onto the silicon wafer – take away the energy produced photoelectrically. The connection of these interconnect ribbons with the rectifier takes place via the so-called busbars – slightly larger copper ribbons that are also tinned.

FUHR supplies highly productive rolling mills for the rolling of interconnect ribbons and busbars from round copper wire. The rolled ribbons are formed into coils and can then be annealed and tinned in later processes.

High requirements as to dimensional accuracy and straightness of the ribbons are placed on the rolling mill, since only this allows smooth further processing of the ribbon.

Combined drawing and rolling line for PV ribbons

Complete line
Three stand standard line for the typical range of sizes for the copper ribbons for photovoltaics.

On the input side, the round wires are calibrated in the drawing die. This reduces the number of sizes of round wire which have to be kept in stock.

Speed
up to 1.200 m/min

Size range
Width: 1 to 8,0 mm
Thickness: 0,1 to 0,50 mm

Precision
IT7 for thickness

YouTube

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren

Video laden

Driven sleeve uncoiler

  • Integrated lifting function for loading and unloading
  • No foundation pit required
SMH-Pi | SLEEVE SPOOLER

Double-drum drawing machine

  • Calibration of the incoming round wire by wet drawing
  • Cylindrical drawing drum with tungsten carbide coating
  • No relative motion between wire and drawing drum and no contact between the wraps of wire. Best wire quality as a result

2-high rolling mill

  • Tungsten carbide rolls of 120 mm diameter
  • Continuous roll oscillation to avoid track marks
  • Bearing oil lubrication with oil cooling for highest precision
  • Roll positioning by servomotors
WSR | FLAT WIRE

Width and thickness measurement

  • Contactless width measurement by means of laser shadow principle
  • Thickness measurement as contact measurement with diamond tips
  • Automatic wire dimension control for width and thickness
  • Trending diagram in operator panel
  • Data export as csv file or via network interface
IMS | INLINE MEASUREMENT SYSTEM

Drawing machine with wire drying

  • Double drum drawing machine for separation of rolling and spooling process. Drawing tension for rolling and spooling can be optimally selected
  • Integrated hot air drying to avoid oxidation on the reel

SMH630-Mo/O-Pi precision layer spooling machine

  • Spooling machine with integrated lifting mechanism
  • No foundation pit required
  • Computer controlled layer winding program
  • Faultless layer winding with guide wheel
SMH-Pi | SLEEVE SPOOLER

Contact

We look forward to
your request!

FUHR GmbH & Co. KG
Ottenhausener Straße 49
D-32839 Steinheim

P.O. Box 1230
D-32834 Steinheim

+49 5233 38360 0 (tel)
+49 5233 38360 50 (fax)
office@fuhr-wire.com

Enquiry